48V power supplies, automation, LED, DIN rail, ITE

48V Power Supplies from 6W to over 3kW

Available power from 6W to over 3kW


Find the 48V power supply you are looking for right away; refine your search with the selection filters.

Mechanical format: 48V Power Supplies for Din Rail, 48V Desktop Power Supplies, 19" Rack, etc.

Application: Power supplies for Industrial Automation, Power supplies for LEDs, etc.

Power Watt: 48V Power Supplies starting from 6W to over 3kW - choose the power.

Output current: in Amperes - choose the current

Other parameters: Using the selection filters you can choose every detail of the 48 Volt AC DC power supply


CBI4810A DC UPS System Evolved by Adelsystem 480W/48V / 10A / Lead - Lithium - Gel - Ni-Cd
Available
CBI4810A DC UPS System Evoluto Adelsystem 480W / 48V / 10A
DC System Evoluto - Adelsystem - CBI4810A (MODbus connection) - CBI4810AP (parallel connection)
Power 480W / 10A / 48V nominal
Charging current 10A
CE / * certifications
Features: Battery diagnostics, Multistage charging, Fault relay
For batteries: Lead - Lithium - Gel - Ni-Cd

€442.68
CRD - Microset - DC/DC Converter - Voltages 12V 24V 48V - Step-Up / Step-Down
Available
New family of reliable, compact and robust DC/DC converters of the latest generation with isolation between input and output.
The floating polarities allow the input with positive to ground and output with negative to ground for telephone and mixed applications.
Output voltage adjustment +/-15%. Absence of a fan for maximum reliability without maintenance. Convenient DIN rail mounting.
Also optional on the side through a special flange.
Option: paralleling wiring of 2 or 3 units.
€182.77
CVM600P LED Power Supply Glacial Power 600W - Constant Voltage CV - 3-in-1 DALI2 dimmable
Product available with different options
Main features:

Universal AC input range from 90 to 305VAC.
Constant voltage mode.
Active PFC.
Protections: OVP / OCP / SCP / OTP.
High efficiency up to 96%.
Overvoltage protection with 4KV/2KV.
No-load power consumption (for non-dimming models).
Standby power consumption (for dimming models).
Suitable for LED strips and motion applications.
Available 3-in-1 dimming functions (from dimming to off) and DALI-2.
Fully isolated enclosure with IP67 rating.
Cooling by free convection (metal housing).
The output and dimming lines comply with the new regulation with isolation.
EDR-120 MeanWell - DIN rail power supply 120W - Voltages 12V, 24V, 48V
Available
The DIN RAIL power supplies from the Mean Well EDR-120 series are entry-level products, with a 2-year warranty, they are designed for mounting in an electrical panel using DIN TS-35/7.5 or TS-35/15 rails. Also, its compact design with just 40mm width saves precious space in the panel.
Main Features:



Economical and reliable
Slim design 40mm wide
Can be installed on DIN TS-35/7.5 or 15 rail
Practical terminals for input (below) and output (above).
Safe: equipped with overvoltage, short-circuit, and overload protections
Perfect for installation in industrial machines and electrical panels
Quiet: No fans
2-year warranty
Efficiency up to 88.5%
Input: 90-264VAC
Certifications: UL, CE
Dimensions: 40x125.2x113.5mm


€31.08
EDR-75 MeanWell Din Rail Power Supply 75W Input 90 ~ 264VAC Voltages 12V 24V 48V
Available
The EDR-75 series is a power supply on a DIN rail of 75W with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.


Features:

Universal AC / Full range
Protections: short circuit / overload / overvoltage / overtemperature
Cooling by free air convection
Can be installed on DIN rail TS-35 / 7.5 or 15
UL 508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
100% full load burn-in test
2 years warranty
Dimensions: 32x125.2x102mm




 
€24.71