LED strips are a practical and versatile type of lighting, widely used in recent years. They are composed of a structure that has a printed circuit inside which there are (typically) resistors and a series of LEDs.
On Alimentatorishop.com you will find a wide choice of custom-made or standard LED bars, ideal for lighting your wardrobe or in the kitchen as LED lighting under cabinets.
LED light bars are also available to illuminate work areas or offices.
LED lighting profiles are usually aluminum supports, which are used with LED strips and can be used practically anywhere.
In fact, they are ideal for any type of application, from the ceiling to the plasterboard wall, to illuminate the steps of a staircase or the floor or, much more simply, a walk-in closet or the kitchen cabinets/under cabinets.
Wide range input 340-550VAC three-phase (also operates in dual phase)
Width only 63 mm
Compliance of built-in active PFC function to EN61000-3-2
High efficiency 92% and low power dissipation
Full power between -30 ~ + 60 ° C
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Built-in constant current limiting circuit
Can be installed on DIN TS-35 / 7.5 or 15 rail
UL61010 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
Current sharing up to 3840 W (3 + 1)
Integrated DC OK relay contact
3 years warranty
Dimensions: 63x125.2x113.5mm
The UHP-500 series is a 500W enclosed AC/DC power supply with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.
The UHP-500 series operates with an input voltage of 90-264 VAC, it is especially required for industrial applications and electronic equipment.
Features
Low and thin profile (31 mm)
Built-in active PFC function
Fanless design, 500 W convection
Resist 300 VAC input surge for 5 seconds
-30 ~ + 70 ℃ working temperature
Protections: short circuit, overload, overvoltage, overtemperature
Active DC OK signal and redundant function (option)
Operating altitude up to 5000 meters
LED indicator for power on
3 years warranty
Dimensions: 232x81x31mm
Mean Well DIN rail power supply NDR-480
The NDR-480 series is a power supply on a DIN rail of 480W with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.
Features
Universal AC
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Can be installed on DIN rail TS-35 / 7.5 or 15
UL 508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
100% full load burn-in test
3 years warranty
Built-in active PFC function
Dimensions: 85.5x125.2x128.5mm
