LED strips are a practical and versatile type of lighting, widely used in recent years. They are composed of a structure that has a printed circuit inside which there are (typically) resistors and a series of LEDs.
On Alimentatorishop.com you will find a wide choice of custom-made or standard LED bars, ideal for lighting your wardrobe or in the kitchen as LED lighting under cabinets.
LED light bars are also available to illuminate work areas or offices.
LED lighting profiles are usually aluminum supports, which are used with LED strips and can be used practically anywhere.
In fact, they are ideal for any type of application, from the ceiling to the plasterboard wall, to illuminate the steps of a staircase or the floor or, much more simply, a walk-in closet or the kitchen cabinets/under cabinets.
Buy Simple and Advanced Chargers, DC UPS Systems, Charge Controllers
Choose your charger from the best brands available on our Online Shop: Mean Well, REL Power, Cotek Electronic, Alcapowerm Adelsystem. Buy simple chargers, for cars, motorcycles, or other vehicles, or Advanced chargers.
Battery Charger ALCAPOWER for CarsCharging Current: 3.8 A max for 6V, 12V lead-acid batteries and 3.0Ah max for LiFePo4 batteries
Rechargeable Battery Types: WET, MF, VRLA, AGM, GEL, and LiFePO4.
Protection Degree: IP65
Dimensions: 176 x 72 x 47 mm
Recommended Capacities: - Batteries Lead-Acid 6V, 12V: from 1.2h to 120Ah - Batteries LiFePo4: 12.8V from 8Ah to 50Ah
Input: Single-phase 115 – 230 - 277 Vac
Selectable Load Output: 24Vdc 2.5A
Battery Charge Output: 12 Vdc 5A
Suitable for the following types of batteries: Open lead, Sealed lead, Lead gel, Ni-Cd, Li-Ion
Automatic battery status diagnostics, Battery life test function (Battery internal impedance)
IUoU charge curve, constant voltage and current
Four charge levels: Boost, Bulk, Trickle, Recovery
Protected against short circuit and reversed polarity
Signal output: for battery failure, Network or Emergency Power
Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
DIN rail and wall mounting
Input: Single-phase 115 – 230 - 277 Vac
Selectable Load Output: 12Vdc 5A
Battery Charging Output: 12 Vdc 5A
Suitable for the following types of batteries: Open Lead, Sealed Lead, Lead Gel, Ni-Cd, Li-Ion
Automatic battery status diagnostics, Battery life test function (Battery internal impedance)
IUoU charging curve, constant voltage and current
Four charging levels: Boost, Bulk, Trickle, Recovery
Protected against short circuit and reverse polarity
Signal output: for battery failure, Network or Emergency Power
Ethernet: SNMP V3, Modbus TCP/IP, HTTPS
DIN rail and wall mounting
Single phase input 115-230-277 Vac
Selectable output load: 12Vdc - 15A; 24Vdc - 10A
Selectable battery charger output: charge 12 Vdc - 15A; 24Vdc - 10A
Perfect for the following types of batteries: free acid lead, sealed acid lead, gel lead, Li-Ion and Ni-Cd
Automatic battery status diagnosis. IuoU charging curve, battery life test function.
Switch technology
Four charging stages: boost, absorption, float and recovery
Protection against short circuit and reverse polarity
IP20 protection
DIN rail
Compact space
Diagnostics for SoC (state of charge) and SoH (state of health)
5-stage charging algorithms: Recovery, Boost, Absorption, Float
Protection against short circuits, reverse polarity, and overvoltageCommunication protocol: Modbus RTU RS485 for remote monitoring and controlEasy installation: Push-in connectors and configuration via buttonUltra-compact design: 50 mm width, ideal for electrical panels with limited spaceProtection degree: IP20, DIN rail mounting
DC UPS CBI126A Adelsystem, All In One unit
Features:
Single-phase input 115-277 Vac
Output load: 12Vdc - 6A
Battery output: 12Vdc - 6A charge
Perfect for the following battery types: lead acid free, sealed lead acid, gel lead, Li-Ion and Ni-Cd
Automatic battery status diagnosis. IuoU charging curve, battery life test function.
Switch technology
Output voltage (10-14.4Vdc).
Three charging modes: boost, float, and recovery
Protection against short circuit and reverse polarity
IP20 protection
DIN guide
Compact size
DC UPS CBI123A Adelsystem, All In One unit
Features:
Single-phase input 115-277 Vac
Output load: 12Vdc - 3A
Battery output: 12Vdc - 3A charge
Perfect for the following battery types: lead acid free, sealed lead acid, gel lead, Li-Ion and Ni-Cd
Automatic battery status diagnosis. IuoU charging curve, battery life test function.
Switch technology
Output voltage (10-14.4Vdc).
Three charging modes: boost, float, and recovery
Protection against short circuit and reverse polarity
IP20 protection
DIN guide
Compact size
Single-phase input 115-277 Vac
Output load: 12Vdc - 10A
Battery output: 12Vdc - 10A charge
Perfect for the following battery types: lead acid free, sealed lead acid, gel lead, Li-Ion and Ni-Cd
Automatic battery status diagnosis. IuoU charging curve, battery life test function.
Switch technology
Output voltage (10-14.4Vdc).
Three charging modes: boost, trickle, and recovery
Protection against short circuit and reverse polarity
IP20 protection
DIN guide
Compact size
Input: Single phase 100 – 240 - 277 Vac
Battery Output: 24 Vdc 3A (5A max)
“Power Supply” Function
Suitable for the following types of batteries: Open Lead Acid,
Sealed Lead Acid, Lead Gel and Ni-Cd
Battery Care: Automatic battery status diagnostic
IUoU Charging Curve: constant voltage and current
High efficiency with quasi-resonant switching technology
Charging levels: Boost, Absorption, Float, Recovery.
Protection against short circuit and polarity reversal
Signal Output (open contact) for low or damaged battery
Protection Degree IP20
DIN rail or panel mounting
Input: Single phase 100 - 240 - 277 Vac
Battery Output: 12 Vdc 5A
"Power Supply" function
Suitable for the following types of batteries: Open Lead Acid,
Sealed Lead Acid, Gel Lead and Ni-Cd
Battery Care: Automatic battery status diagnostics
IUoU Charging Curve: constant voltage and current
High efficiency with near-resonant switching technology
Charging levels: Boost, Absorption, Float, Recovery.
Protection against short circuit and polarity reversal
Signal Output (open contact) for discharged or damaged battery
Protection Degree IP20
DIN rail or panel mounting
