Guides

Can bus: discover everything you need to know about the reliable serial standard for electronic communication. 

Cotek is a company specialized in designing and manufacturing power supply solutions for a wide range of industrial applications, including automation, scientific and medical laboratories, and transportation industries. Their product line includes programmable power supplies, which are widely used in the industrial automation sector.

In recent years, power supply requirements have posed several challenges to designers, including multiple power supply voltages, voltage sequencing, high peak currents, or excessive heat. To address these issues, designers must intervene on the printed circuit board and introduce measures at the PCB level. A common solution for this purpose is the use of converters at the point of load or PoL. In fact, miniaturized PoL converters are increasingly appreciated because they allow to meet market...

When it comes to the manufacturing industry, different types of DIN rail power supplies come into play, mostly based on the type of application being used. The rule is therefore very simple: different uses, different standards. Specifically, for applications that require high reliability due to difficult installations, such as in the manufacturing sector, renewable energy, wind power, or railway, characteristics such as efficiency, reliability, and performance are absolutely a priority.

In an era where various technologies evolve before our eyes, especially in recent years since the pandemic erupted, 3C products have become items that each of us inevitably carries with us. Yet, despite continuous improvements both in performance and design, the products can vary greatly from each other.

Power switching power supplies with dual power rating offer compact, lightweight, and cost-effective solutions without compromising the performance and reliability of the device. When there is a need for power supplies for systems that require higher power peaks than a normal power supply for short periods, generally, expensive, bulkier, and more powerful products are chosen.

Historically, the 110V batteries located in the main locomotive have been the primary source of DC current for most railway applications. This meant that in order to light the individual wagons, it was necessary to run cables throughout the length of the train.

One of the fundamental requirements for the search and purchase of electrical material (specifically power supplies or lighting systems) is the ability to resist intrusion of external materials into the devices, whether it be water or dust and debris. The individual application can vary based on the positioning of the device within the system and it is therefore essential to be able to understand from which sources of disturbance and deterioration our product should be protected from.

A photovoltaic (PV) system is composed of an array, a combiner, a cabinet for DC energy distribution, an inverter, a transformer, etc... Higher input and output voltage levels can significantly reduce losses in the AC/DC line, as well as minimize wiring losses on the low-voltage side of the transformer, thereby automatically increasing the efficiency of the entire system. Moreover, having a compact system with high power density also helps in management, transportation, and maintenance...

With the increase of smart devices and Internet of Things (IoT) in the market, the need for low-voltage DC is constantly growing. In particular, as the performance of end devices increases, the power required to power them also increases accordingly.

The Digital Addressable Lighting Interface (DALI) is a protocol for the control and management of lighting systems capable of providing reliability, adaptability, and flexibility to the entire lighting network.

Similar products but with some different characteristics that can make a difference at the time of purchase. Here is our brief analysis and comparison between the Mean Well NDR-240 and Mornsun LIF240 models, 240W DIN rail power supplies for industrial and electromechanical applications.

How to increase safety in medical power devices? With the continuous development of the medical industry, the technology and quality of medical devices are growing consequently, leading to continuous innovation and an increase in all related products. Considering their key role, the demand and requirements of medical power supplies are becoming a priority during the construction phase. The way in which the development of the medical industry meets the product performance, as well as...

Follow our Guide to set up your Custom LED Bars according to your needs

Illustrate the effect of overvoltages on the failure rate of electronic components and systems.

Presentation of the results of a new lightning protection system propagating on the input power supply.

Introduction to LED Lighting Products

Inverter: what is it? What is it for? Which application to choose? Find out with this Selection Guide.

Find the perfect Power Supply for your Notebook, Tablet, Monitor, Router, etc. in two simple steps.

How to choose UPS for PC or server?