LED Aluminum Profile Angular for Step - Model SC7238

Angular Architectural Profile, specific for installation on stairs. Designed for LED strips with a maximum width of 12mm.
Specially designed for lighting stairs in public places, with space for non-slip rubber.

The Architectural Profile SC7238 can be installed using through screws on the surface of the step.

For safety reasons, this step profile is equipped with Non-Slip Covers that hide the installation screws and ensure greater adhesion to the surface.

This particular Step Profile has been designed to hold LED Strips in Four Different Positions depending on where you want to direct the light flow.

We recommend using it to dissipate the heat produced by the LEDs and maximize their lifespan.

Available covers

Frozen (PC/PVC)

Caps - available in aluminum or plastic, with or without hole

Black	Silver

Additional accessories are also available for all profiles, both for suspension and for turning on and dimming the locally emitted light.

Assembly instructions for the SCALA staircase profile with TERRA diffuser and ANTI non-slip wire	Final effect of the assembly of the SCALA staircase profile with TERRA diffuser and ANTI non-slip wire
Example of the method of mounting the LED strip in the SCALA profile - 1.	Example of the method of mounting the LED strip in the SCALA profile - 2.
Example of the method of mounting the LED tape in the SCALA profile - 3.	Example of the LED strip mounting method in the SCALA - 4 profile.